Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Arlington Homeowners
A broken spring turns a working garage door into a dead weight in seconds, and it usually happens without any warning. If your door won’t lift, jerks and slams down, or you heard a sharp bang from the garage, the springs have likely failed and need professional attention before anything else moves. Our technicians have up to 12 years of experience and treat spring work as a specialty, not a side job, because it’s the highest-tension, highest-risk repair on any door. We work on the brand you already own, and we can often reach Arlington homes the same day for a true emergency. Call (877) 745-1385 for a free estimate and upfront pricing.
What Our Garage Door Spring Repair Service Includes
Spring work covers more than swapping a coil of steel. Each of the six services below addresses a different failure point, and we diagnose which one you’re facing before recommending any work.
Torsion Spring Replacement
Torsion springs sit on a metal shaft above the door and do the heavy lifting every time you open it. When one breaks, the door suddenly weighs far more than the opener was built to handle, and the opener or door can be damaged if you keep cycling it. We replace the spring, reset the tension to match your door’s weight, and check that the cables and drums are tracking correctly.

Extension Spring Replacement
Extension springs run along the tracks on either side of the door and stretch as it closes. Older homes in Arlington often still have these, and when one snaps it can whip toward anything nearby, which is why safety cables matter on every extension setup. We replace the failing spring, install or confirm the safety cables, and balance the pair so the door travels evenly.

Broken Spring Repair
A snapped spring is the most common reason a door won’t open at all, and you’ll often find a gap in the coil or a piece of it resting on the floor. It’s a job for a trained technician because the stored energy in a wound spring can cause serious injury to anyone handling it without the right tools. We identify the break, remove the failed spring safely, and replace it with the correct size for your door and opener.

Spring Adjustment
Springs don’t just break, they also lose tension over time, which leaves the door feeling heavy or causes the opener to strain. If your door drifts down when you let go halfway up, or the opener hums but struggles, the tension needs adjusting. We measure the door’s balance and set the springs so the door moves smoothly without overworking the opener.
Safety Cable Installation
Safety cables thread through the center of extension springs so a broken spring can’t fly loose. If your system has no cables, or the ones you have are frayed or rusted, they’re a small addition that makes the door much safer. We run new cables through the springs and anchor them to the track bracket.
Spring Inspection
A spring inspection catches wear before it turns into a snapped spring and a door that won’t move. We look at the coils for gaps and rust, test the door’s balance, and check the cables and rollers at the same time. It’s the fastest way to know whether your springs have months left or days, and it’s included whenever we’re already on site.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We’re factory-familiar with eight major brands, and that matters when your door is a Clopay or your opener is a LiftMaster. On Clopay doors we know how the spring system and hardware wear, so we can match replacement springs to the door’s weight instead of guessing. For LiftMaster and Chamberlain openers, we check that the opener’s force settings and travel limits are recalibrated after a spring replacement so the door and opener work together.
We also service Genie, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and we work on the door and opener you already have rather than pushing a replacement you don’t need. If your springs have failed, the goal is getting you back up and running with the right fix. Whether you have a Clopay door with a Chamberlain opener or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
Springs don’t usually give you a long warning. These are the signs that mean it’s time to call, not wait.
- A loud bang from the garage. A breaking torsion spring sounds like a firecracker or a heavy door slamming. If you heard it and the door won’t lift, the spring has snapped and the door should stay down until a technician arrives.
- The door won’t open, or opens a few inches and stops. When the springs stop carrying the door’s weight, the opener can’t lift it alone. Forcing it strains the opener and could damage the door.
- The door feels heavy when you lift it by hand. A balanced door should lift with light effort. If it feels like dead weight, the springs have lost tension or broken.
- A visible gap in the spring coil. Look at the torsion spring above the door or the extension springs along the sides. A gap or a loose piece of coil means it’s already failed.
- The door slams down or drifts when partly open. A door that drops on its own or won’t hold position is out of balance. That’s a spring problem, and it’s a safety issue for anyone standing underneath.
Our Garage Door Spring Repair Process – Step by Step
Spring repair is precise work. Here’s how a typical visit goes from the first call to a door that moves like it should.
- 1
We ask what’s happening on the phone. A quick description of the symptom, the door type, and the brand helps us arrive with the right springs and plan. We confirm the appointment and give you the price range upfront so there are no surprises.
- 2
We diagnose on site. We test the door’s balance, inspect the springs, cables, drums, and rollers, and check the opener. We identify the actual failure rather than assuming, so you get the right fix, not the easiest upsell.
- 3
We give you a written estimate before any work starts. The price we quote is the price you agree to. We explain what’s included, whether it’s one spring or a matched pair, and answer your questions before we touch a tool.
- 4
We replace the springs safely. Spring replacement means winding and unwinding high-tension steel. We use winding bars and proper tension tools to release and reset the springs, and we replace matched pairs together so the door stays balanced.
- 5
We test and recalibrate. After the springs are in, we run the door, check the balance, and adjust the opener’s force and travel settings. We hand you a door that opens and closes smoothly, and only then do we call it done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Arlington?
A typical garage door spring repair in Arlington runs $180 – $340, and that’s the price for one spring. A matched pair is usually replaced together, so a pair costs about twice that range. Cable repair, which is sometimes needed when a spring fails, runs $130 – $250. Opener repairs run $120 – $320 if the opener was strained, and panel or track work falls in the $120 – $500 range depending on what’s damaged.
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Panel replacement | $250 – $500 |
What affects the price: whether one spring or both need replacing, the spring size and cycle rating for your door, whether the cables were damaged, and whether the opener needs recalibration. To avoid overpaying, get the written estimate before work begins, ask whether it covers one spring or a pair, and ask whether the price includes testing and opener adjustments. Our free estimate spells out each line item so you can see exactly what you’re paying for, and the written estimate sets the final price.
Garage Door Spring Repair Near Arlington – Our Service Area
We serve Arlington and the surrounding neighborhoods, including Seven Corners, Bailey’s Crossroads, Lake Barcroft, Falls Church, Alexandria, West Falls Church, Lincolnia, Idylwood, Pimmit Hills, Annandale, and Huntington. Response times depend on where you are and what’s booked, but broken-spring calls are treated as urgent and we do our best to reach you quickly. For garage door spring repair in Seven Corners or Bailey’s Crossroads, call and we’ll confirm timing.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Arlington
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that carry your door’s weight. When a spring breaks or loses tension, the door can’t open safely and the opener strains to lift it. A technician diagnoses the failure, replaces the spring or pair, and rebalances the door. It’s the highest-tension repair on any garage door, so it’s a job for a trained pro.
Most spring repairs take about 45 minutes to an hour and a half once the technician is on site. Replacing a matched pair, checking the cables, and recalibrating the opener adds a little time. We always test the door before we leave. Call (877) 745-1385 to book a visit.
A typical spring repair in Arlington runs $180 – $340 for one spring, and a matched pair costs about twice that range. The final price depends on spring size, whether cables need replacing, and opener adjustments. The written estimate we give you before work starts sets the final price. Call (877) 745-1385 for an exact quote – estimates are free.
Yes, we service LiftMaster, Chamberlain, Genie, and Clopay equipment, among other brands. Spring replacement often means recalibrating the opener’s force and travel settings, and we’re familiar with how these brands respond. We work on the equipment you already own rather than selling you a replacement. Never list-stuffed together as a pitch, we simply know these systems well.
Yes, we treat broken springs as urgent and can often reach Arlington homes the same day. A door stuck open or a car blocked in the garage needs fast attention, and we prioritize those calls. Call (877) 745-1385 and we’ll confirm the soonest available time. Emergency service is available for situations that can’t wait.
The warranty on a spring replacement depends on the spring and the job, and we’ll explain the terms in your written estimate before work begins. We stand behind the work and will answer any questions about coverage upfront. Ask us during the free estimate so you know exactly what’s covered.
Clear the area in front of and under the garage door so the technician has room to work. Keep the door down and don’t try to lift it or run the opener if the spring is broken. Have the door and opener brand handy if you know it, and let us know if the car is blocked inside. We’ll handle the rest.
Schedule Your Garage Door Spring Repair Service in Arlington Today
A broken spring leaves your door stuck and your car trapped, and it won’t fix itself. Call Gaines Garage Door Repair at (877) 745-1385 for a free estimate and upfront pricing, and we’ll get your door back up and running. We diagnose the actual problem, replace only what’s failed, and quote the price before any work starts. Estimates are free and there’s no obligation.
Written by the team at Gaines Garage Door Repair.