Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Arlington Homeowners
A garage door that won’t open is a problem you feel within the first minute of your morning – the car’s trapped, the house is open, and the day is already off course. At Gaines Garage Door Repair, we get Arlington doors moving again: broken springs, snapped cables, bent tracks, dead openers, and panel damage on the makes homeowners here actually own. Our technicians have up to 12 years of experience, and they’re factory-familiar with the brands we service, so they diagnose your door rather than guess at it.
Springs are our specialty, not a side job. It’s the highest-tension repair on any door and the one we take most seriously. We also treat a door stuck open overnight or a snapped spring blocking your car as a genuine urgency, not a routine slot next week. Same-day service is often available in Arlington. Call (877) 745-1385 and we’ll get you back up and running.
What Our Garage Door Repair Service Includes
Most Arlington garage doors fail in one of a handful of predictable places. Here’s what each repair covers, when you’ll likely need it, and how we handle it.
Panel Replacement
A panel gets bent from a backing-out car, dented from an impact, or rusted through at the bottom edge where water sits. You need panel replacement when one section of the door is damaged but the rest of the structure is still sound – replacing the whole door for one dented panel is usually money you don’t need to spend. We match the panel to your door’s profile and color as closely as the manufacturer allows, then check the surrounding sections for hidden stress before we close the job. If your door is a Clopay or Amarr, we know their panel lines well and can tell you quickly whether a match is realistic or whether the door is due for a larger conversation.

Spring Repair
Springs carry the full weight of the door and cycle thousands of times before they fail, so a snap is normal wear, not neglect. You need spring repair when the door feels impossibly heavy to lift, won’t stay open more than a foot, or you hear a loud bang from the garage. This is the repair we treat as a specialty. Springs are under extreme tension and can cause serious injury if handled without proper tools and technique, so this isn’t a job to attempt yourself – we recommend a trained technician every time. We replace torsion and extension springs, and we’ll tell you when a single spring can be swapped versus when a matched pair should go together. One spring typically runs $180 – $340; a matched pair is usually replaced together and costs about twice that.

Cable Repair
Lift cables run from the bottom corners of the door up to the drums on the torsion shaft, and they take the same punishment as the springs. You need cable repair when a cable has frayed, jumped its drum, or snapped completely – often the door will sag on one side or refuse to close level. A broken cable is a genuine safety issue because the door is no longer supported evenly, and we’d rather you didn’t run it at all until a technician arrives. We replace both cables as a set when one fails, since the other is almost always at the end of its life too.

Track Realignment
Track realignment is straightening or resetting the vertical and horizontal rails the door rides on. You need it after an impact, when the door has jumped the track, or when the rollers start grinding and the door shudders on the way up. Even a small kink in the track puts pressure on every roller and cable, so a track that’s off by half an inch can turn into a much bigger repair if you ignore it. We check the entire track run, re-anchor any loose brackets, and confirm the door runs smooth and level before we leave.
Roller Replacement
Rollers are the small wheels in the hinges and brackets that let the door glide along the track, and they wear out quietly. You need roller replacement when the door gets noisy, vibrates, or moves in jerky steps – flat-spotted steel rollers are usually the culprit. We swap the full set rather than one or two, because a mixed set wears unevenly and you’ll be back at it within months. Nylon rollers are quieter and last longer than the steel ones most builders install, and we’ll show you the difference so you can decide.
Sensor Calibration
The safety sensors sit near the floor at each side of the opening and tell the opener to reverse if something is in the way. You need sensor calibration when the door won’t close, closes then immediately reverses, or the opener light flashes as if it’s confused. These are often simple alignment or wiring problems, but they also matter for safety – a sensor that isn’t working means the door won’t stop for a child or a pet. We re-aim, clean, and test both sensors, check the wiring and the opener logic, and confirm the door reverses on contact before we call it done.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We service eight major garage door and opener brands, and our technicians know where each one wears out. On LiftMaster and Chamberlain openers – which share a lot of internal design – we’re familiar with the logic boards, travel limits, and safety-reverse behavior that tend to fail first, so diagnosis is quick. With Genie, we know the screw-drive and belt-drive quirks and the parts that go before the rest of the unit does. Our approach is brand-agnostic: we work on the door and opener you already have rather than pushing you toward a replacement you don’t need.
On the door side, Clopay and Amarr panels are the ones we see most often in Arlington garages, and we know their profile lines and how they hold up to the weather swings here. Wayne Dalton, Craftsman, and Raynor round out the mix, and we’ve handled enough of each to know where the weak points are. Whether you have a LiftMaster opener, a Clopay door, or any other make, we can help – and if your equipment is past the point where a repair makes sense, we’ll tell you plainly rather than reinvent the wheel.
Signs You Need Garage Door Repair Right Now
- A loud bang from the garage. A torsion spring snapping sounds like a firecracker and often shakes the whole house. If you hear it and the door won’t lift more than a few inches, stop running the opener – you’re putting the motor and the cables under strain and risking a bigger bill.
- The door is crooked or sags on one side. When one side lifts and the other drags, you’re usually looking at a broken cable or a spring that’s lost tension. Running it in this state can bend the tracks and turn a straightforward repair into a two-part one.
- The door reverses or won’t close. A door that goes down and pops back up is usually a sensor or travel-limit issue, and it leaves your house open at night. That’s worth a same-day visit even if nothing looks visually wrong.
- Grinding, squealing, or shuddering. Worn rollers, dry hinges, and a track that’s out of line all show up as noise and vibration. It’s rarely an emergency, but it’s a warning that something’s wearing and it compounds if you wait.
- A visible dent, kink, or bent track. Impact damage – even a slow bump backing out – can throw the door off its alignment. A bent track will chew through rollers fast, so it’s worth an inspection before the damage spreads.
Our Garage Door Repair Process – Step by Step
- 1
You call and we listen. Tell us what the door is doing – won’t open, noisy, stuck halfway, crooked. That first description tells us a lot, and it lets us bring the right parts and set expectations on timing. If it’s a genuine emergency, we treat it like one.
- 2
We diagnose on arrival. We test the opener, check the springs, cables, and tracks, and look for wear that isn’t obvious from the ground. We use a level on the door and a physical check of spring tension and cable condition rather than guessing by sound alone.
- 3
You get a written estimate before any work starts. We tell you what we found, what it costs, and what happens if we find something else once we’re in. The price is quoted and agreed before we touch the door, so there are no surprises on the invoice.
- 4
We do the repair. Springs, cables, rollers, tracks, panels, sensors – whatever the job needs, handled start to finish by the technician who diagnosed it. We test the door through full cycles, confirm the safety reverse works, and clean up after ourselves.
- 5
We walk you through it. We show you what we replaced and why, and we point out anything on the door or opener that’s worth watching. If the door is headed toward a replacement down the road, you’ll hear it plainly – not as a pitch, but as information you can act on when you’re ready.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Arlington?
Garage door repair in Arlington typically runs $150 – $600, depending on what’s broken. A typical spring repair runs $180 – $340 for one spring, and a matched pair is usually replaced together at about twice that. Cable repair typically runs $130 – $250, track realignment $120 – $240, roller replacement $110 – $220, panel replacement $250 – $500, and opener repair $120 – $320. If the opener itself needs replacing rather than repairing, opener installation typically runs $250 – $550, and a full new door installation $700 – $2200.
What affects the price: which component failed, how many need replacing, whether the door is a single or double, and whether the damage spread because the door was run after the failure. The best way to avoid overpaying is to stop running a broken door and get it looked at, because a $150 problem can become a $500 one fast. Our estimates are free, and every price is quoted and agreed before any work starts. The written estimate sets the final price.
Garage Door Repair Near Arlington – Our Service Area
We serve Arlington and the surrounding neighborhoods, including Lake Barcroft, Falls Church, West Falls Church, Idylwood, Pimmit Hills, Annandale, Lincolnia, Huntington, Alexandria, and Seven Corners. Response times depend on the day and the job, but a broken spring or a door stuck open usually gets same-day attention. Whether you’re near Bailey’s Crossroads or closer to West Falls Church, we can get a technician to you and get the door back up and running. For more about Gaines Garage Door Repair and what we cover, or to book garage door repair in Seven Corners or garage door repair in Bailey’s Crossroads, give us a call.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Arlington
Garage door repair is fixing the specific parts of a door or opener that have failed – springs, cables, rollers, tracks, panels, sensors, or the opener itself – rather than replacing the whole door. It covers the diagnosis, the part, the labor, and testing the door through full cycles before the job is done. Most repairs can be handled on-site in a single visit if the parts are available. If the door is past the point where a repair makes financial sense, we’ll tell you and explain why.
Most repairs take one to three hours on-site, depending on the job. A spring replacement or a sensor calibration is usually on the shorter end; a panel replacement or a cable job that involves resetting the door can run longer. We give you a realistic estimate when you call, and if we find something unexpected once we’re in, we let you know before we keep going. Call (877) 745-1385 for an exact quote – estimates are free.
Garage door repair in Arlington typically runs $150 – $600, depending on the part and the extent of the damage. A typical spring repair runs $180 – $340 for one spring, cable repair $130 – $250, track realignment $120 – $240, roller replacement $110 – $220, panel replacement $250 – $500, and opener repair $120 – $320. A matched pair of springs is usually replaced together and costs about twice the single-spring range. The written estimate sets the final price. Call (877) 745-1385 for an exact quote – estimates are free.
Yes, we service LiftMaster and Chamberlain openers, along with Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Our technicians know the logic boards, travel limits, and safety-reverse behavior on these brands, so diagnosis is faster and the fix is usually right the first time. We work on the equipment you already have rather than steering you toward a replacement. Whether your opener is one of these brands or another make, we can help.
In most cases, yes – a door stuck open overnight or a broken spring blocking your car is treated as a genuine urgency, not a routine slot next week. Same-day service is often available in Arlington, and we’ll tell you honestly when we can get there when you call. A door left open is a security and safety issue, so we try to prioritize it. Call (877) 745-1385 and we’ll get you back up and running.
We stand behind the work we do, and the warranty terms are explained in your written estimate before any work starts. The coverage depends on the part and the repair – springs and openers may carry different terms than cables or rollers. If something we fixed isn’t working as it should, call us and we’ll make it right. Ask about warranty coverage when you book so it’s clear from the start.
Clear the floor space in front of the door and around the opener so the technician has room to work safely. Move cars out of the garage if you can, and keep children and pets away from the door and springs while the work is underway. Unlock the door if it has a manual lock, and note any symptoms – noises, spots where it sticks, when it started – so you can describe them clearly. If the opener is working, leave the door closed until the technician arrives so nothing shifts further.
Schedule Your Garage Door Repair Service in Arlington Today
If your door is stuck, noisy, crooked, or just not behaving the way it should, don’t wait for it to get worse. Call Gaines Garage Door Repair at (877) 745-1385 for a free, no-obligation estimate. Same-day service is often available for repairs and emergencies in Arlington, and every price is quoted and agreed before any work starts. We work on your brand, get you back up and running, and give you the right fix, not the easiest upsell.
Written by the team at Gaines Garage Door Repair.