Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Arlington?
Garage door repair in Arlington typically costs between $150 and $600, with most jobs landing somewhere in that middle. A single broken spring runs $180 – $340, a snapped cable $130 – $250, and an opener that won’t respond starts around $120. We give free estimates and upfront pricing, and your written estimate sets the final price before any work begins.
The range is wide because garage doors are systems, not single parts. A door that won’t open could be a tired spring, a frayed cable, a misaligned track, or a logic board inside the opener, and each one prices differently. Use the breakdown below to get a ballpark, then call (877) 745-1385 and we’ll tell you what’s actually wrong.
Garage Door Repair Cost Breakdown (2026)
These are typical estimated ranges for the Arlington market in 2026. The written estimate is what you pay, and we don’t add charges after the fact.
| Repair or Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| General garage door repair | $150 – $600 |
Two things trip people up on price. First, springs. The $180 – $340 range is for one spring. Garage doors almost always carry a matched pair, and when one fails the other is usually the same age and under the same load, so the pair is typically replaced together. That puts a pair at roughly twice the single-spring range. Second, the opener. A remote that stops working can be a $120 battery-and-programming fix or a $320 board replacement, and you won’t know which until the opener is diagnosed. We test the opener before quoting, so the number you get matches the actual fault.
For a full picture of what each repair involves, see our garage door repair page covering the services we handle across the area.
What Affects Garage Door Repair Pricing in Arlington
Arlington’s housing stock shapes garage door costs more than most homeowners expect. Here’s what moves the number up or down.
- Door style and age. Arlington has a deep mix of older brick colonials, rowhouses, and postwar ramblers alongside newer townhome builds in the Ballston and Clarendon corridors. An older wood door with custom trim takes longer to source parts for than a current steel model, and labor follows part availability. A Clopay or Amarr door built in the last decade is faster to repair than a one-off panel from a discontinued line.
- Number of components failing. A door that drops suddenly usually has a spring and a cable involved, and possibly a bent track from the drop. Each failing part adds its own line item, which is why a single-repair job sits near $150 while a multi-part job climbs toward $600.
- Opener brand and model. We work on LiftMaster, Chamberlain, Genie, Craftsman, and Raynor openers routinely, so diagnosis is quick on those. An opener from a brand we don’t see often can take longer to trace, and some logic boards have to be ordered rather than pulled from a shelf.
- Emergency timing. A door stuck open overnight or a broken spring blocking the car in is an urgency, not a routine visit. Emergency garage door service is available for exactly those situations, and it’s worth calling rather than waiting if the door is a security or safety problem.
- Parts versus replacement. When a door has multiple panel dents, worn hinges, and a failing opener all at once, repair can cost more than a basic new installation. We tell you which side of that line you’re on before you commit.
- Track and frame condition. Doors mounted on older framing, common in Arlington’s prewar neighborhoods, sometimes need track realignment or shimming before a new panel fits correctly. That adds time and a line item, but skipping it means the door never runs true.
How to Save on Garage Door Repair
The cheapest repair is the one that fixes the actual problem. A few ways to keep the bill down:
- Get a diagnosis before agreeing to parts. A door that won’t open isn’t automatically a spring job. We test the spring tension, the cables, the track, and the opener separately so you’re not paying for a part you don’t need. That’s the difference between the right fix and the easiest upsell.
- Replace the spring pair together. It feels cheaper to swap one spring now, but a matched pair fails on the same schedule. Doing both at once avoids a second service call for the second spring a few months later.
- Fix small things before they cascade. A worn roller at $110 – $220 is cheaper than the bent track and panel damage it causes when it seizes. Listen for grinding and catch it early.
- Ask for a written estimate up front. Free estimates mean no cost to find out the real number. Call (877) 745-1385 and we’ll give you a range before anyone touches the door.
- Don’t let a small opener issue become a full replacement. A $120 – $320 opener repair is almost always cheaper than the $250 – $550 installation range. If the opener is repairable, we repair it.
One safety note before we go further: garage door springs and cables are under extreme tension. This is the highest-risk repair on any garage door, and a spring that lets go while someone is working near it can cause serious injury. Don’t attempt spring or cable work yourself, even if a video makes it look simple. That’s a job for a trained technician with the right tools and winding bars. Springs are our specialty, not a side job, and we treat them that way.
FAQs – Garage Door Repair Cost
How much does garage door spring repair cost in Arlington?
Spring repair in Arlington typically runs $180 – $340 for one spring. Because doors almost always carry a matched pair that’s replaced together, a full spring replacement is usually about twice that range. Call (877) 745-1385 for an exact quote; estimates are free.
Can you come today if my door is stuck?
Yes, in most cases. A door stuck open or a broken spring blocking your car in qualifies for emergency garage door service, and we treat those as genuine urgencies rather than routine appointments. Call (877) 745-1385 and we’ll get you on the schedule fast.
Is it cheaper to repair my door or replace it?
Repair is usually cheaper unless the door has multiple failing parts at once. A single repair sits in the $150 – $600 range, while a new door installation runs $700 – $2200. If you’re facing panel damage plus opener trouble plus worn hardware, replacement can make more financial sense, and we’ll tell you honestly which side you’re on before you commit.
How much does garage door opener repair cost in Arlington?
Opener repair typically costs $120 – $320, depending on whether it’s a remote, sensor, gear, or logic board issue. If the opener is beyond repair, a new installation runs $250 – $550. Call (877) 745-1385 for a free estimate so you know which applies to your opener.
Do you charge extra for emergency service?
Emergency garage door service is priced per job, and the written estimate always reflects the actual scope. There’s no hidden emergency surcharge tacked on after the fact. Call (877) 745-1385 and we’ll give you the number before we start.
Why Homeowners in Arlington Call Us
We work on the door and opener you already have. Our technicians have up to 12 years of experience and are factory-familiar with eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters when your opener is a ten-year-old LiftMaster and you don’t want a sales pitch for a whole new system. We diagnose first, quote second, and fix what’s actually broken. If a repair will do, we repair. If replacement is genuinely the better call, we’ll show you why.
Spring repair, cable work, opener service, panel replacement, and full new installations all come from the same place, so you’re not coordinating three contractors on one door. Start to finish, one company handles it, and the local pro who does the work is licensed and insured as the state requires. Whether you need a repair today or you’re planning a new Clopay installation, Gaines Garage Door Repair is set up to help.
Get a Free Estimate Today
If your door is grinding, stuck, or just not acting right, don’t wait for it to fail completely. Call (877) 745-1385 and we’ll give you a free estimate with a clear range for the fix. Fast dispatch runs from 7am to 7pm, emergency service is available for doors that can’t wait, and your written estimate sets the final price. Back up and running starts with one phone call.
Pricing reflects the Arlington market as of 2026. Gaines Garage Door Repair offers free estimates – call (877) 745-1385.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Nicole Hayes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Simone Robinson"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Brandon Yang