Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Arlington Homeowners
If your garage door is rusted through, dragging on its tracks, or has been repaired so many times that another fix no longer makes sense, a new door is the practical answer. We install new garage doors across Arlington, from single-car doors on narrow Clarendon lots to double-car doors in the quieter residential blocks out toward Yorktown. Our technicians have up to 12 years of experience, and they’re certified to service eight major brands, including LiftMaster, Chamberlain, Genie, and Clopay. We can also work with your insurer when damage is part of the picture. Installation is scheduled work, not a same-day repair, so we start with a free measure and a written price you approve before anything is ordered. Call (877) 745-1385 to book a measure.
What Our Garage Door Installation Service Includes
Every installation starts with measuring the opening, not with picking a door. The panels have to fit the rough opening, the springs have to be matched to the finished door weight, and the opener has to be rated for the load. Here’s what each type of job involves.
New Door Installation
A full new door installation replaces the door, its springs, tracks, rollers, and hinges as a matched set, so everything wears at the same rate from day one. It’s the right call when the existing door is structurally failing, when a panel style is no longer made, or when you’re changing the opening size. We measure the opening and headroom, confirm the door weight, and set the spring tension to match that door rather than guessing from what was there before.
Single Car Door
A single-car door is the standard 8-to-9-foot-wide door on most Arlington homes with a one-car garage or a separate bay. It’s lighter than a double, but it also cycles more often relative to its size because it’s the door everyone uses. We size the torsion or extension springs to that specific panel weight and check that the opener’s pull force is set correctly for a lighter door, since an overpowered opener on a single door stresses the panels.
Double Car Door
A double-car door covers a 16-foot opening, which means wider panels, a heavier assembly, and considerably more force on the springs and tracks. It’s the door type that most often gets under-sprung by whoever installed it originally, which is why it feels heavy or slams down. We spec the spring system for the actual finished weight of the door, including glass or insulation, and check that the track brackets are anchored properly for the extra span.
Custom Garage Door
A custom door is for openings that don’t match a standard size, or for a look you can’t get off the shelf, like a specific panel pattern, a matched color, or windows in a particular layout. You’d want this when the garage sits under the house, when a standard door would leave awkward gaps, or when the street’s architecture calls for something specific. We measure carefully and walk you through the options before anything is ordered, so the door that arrives is the door that fits.
Steel Doors
Steel doors are the most common choice in Arlington because they hold up to humidity, take paint well, and cost less than wood. They’re a good fit for attached garages and for anyone who wants low upkeep. We help you choose an insulation level that suits whether the garage is conditioned or just storage, and we make sure the door’s finish is sealed at the bottom edge where moisture collects.
Wood Doors
Wood doors give you a warmth and grain that steel can’t copy, and they suit the older brick and frame houses around Arlington well. They need more care, though, because wood moves with the seasons and takes on moisture if the finish is allowed to fail. We talk through the maintenance honestly before you choose one, and if a wood door is right for your house, we install it with hardware and springing sized for the extra weight.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on the door and the opener you already have, which means we’re fluent in the equipment that’s actually installed in Arlington homes. Clopay is one of the most common doors we see, and we know how their panel profiles and insulation options compare across the line. LiftMaster openers are everywhere here too, and we understand their travel limits, force settings, and safety reversal behavior well enough to set them up correctly on a new door rather than just bolting them on.
Chamberlain and Genie equipment comes through our work regularly as well, and each has its own quirks in how the opener pairs with the door and how the safety sensors are wired. Whether you have Clopay, LiftMaster, Chamberlain, Genie, or any other make, we can help, and we’ll tell you plainly if a repair makes more sense than a replacement.
Signs You Need Garage Door Installation Right Now
- The door sags or won’t sit level. A door that hangs crooked when closed usually has a failing panel, a bent track, or springs that no longer match the door’s weight. Once the structure itself is out of shape, repairs tend to be short-lived.
- Panels are cracked, rusted through, or separating. Small dents are cosmetic, but a cracked or rusted-through panel weakens the door and can let water into the frame. On older doors, replacement panels are often discontinued.
- The door shakes or jumps when it moves. That’s usually worn rollers and a track that’s been knocked out of line. If the same door has been realigned more than once, the underlying problem is the door itself.
- You’ve repaired the opener and springs repeatedly. When the same door keeps needing work, the money starts going toward problems a new door would solve. We’ll give you an honest read on which path costs less over time.
- The door no longer fits the opening. A settling foundation or a renovation that changed the opening size means the door can’t seal. A properly measured installation fixes the gap rather than working around it.
Our Garage Door Installation Process – Step by Step
- 1
Free measure and written estimate. We measure the opening width, height, and headroom, check the spring system and the opener, and confirm whether the existing hardware can be reused. You get a written price before anything is ordered, and that price is what you pay.
- 2
Door selection with the tradeoffs spelled out. We walk through steel versus wood, insulation levels, window options, and how each choice affects weight and upkeep. We don’t push the most expensive door; we push the one that suits your garage and how you use it.
- 3
Ordering and scheduling. Once you approve the quote, the door is ordered to your measurements and we schedule the install. This is planned work, so there’s no dispatch window to chase.
- 4
Removal and installation. The old door comes down, the tracks and spring system go up, and the new door is hung and balanced. We set the springs to the door’s actual weight and check that the door moves smoothly by hand before the opener is connected.
- 5
Opener setup and safety check. We set the opener’s travel limits and force, test the safety reversal and the photo-eye sensors, and run the door through several full cycles with you watching. You’ll know how it should sound and feel before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Arlington?
A typical new door installation in Arlington runs $700 – $2,200 depending on the door size, material, and insulation level. A single-car steel door sits toward the lower end of that range, while a double-car door or a custom wood door moves toward the top. Opener installation, if you need a new one, typically runs $250 – $550.
| Service | Typical estimated range |
|---|---|
| New Door Installation | $700 – $2,200 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
What moves the number: door size, material and insulation, whether the opener needs replacing, and whether the opening needs any adjustment. You avoid overpaying by getting the measurement done before the order, so the door that arrives actually fits. Our free estimate covers the measure, the door options, the opener check, and a written price in one visit, and the written estimate sets the final price.
Garage Door Installation Near Arlington – Our Service Area
We handle garage door installation across Arlington and the surrounding neighborhoods, including Seven Corners, Bailey’s Crossroads, Lake Barcroft, Falls Church, Alexandria, West Falls Church, Lincolnia, Idylwood, Pimmit Hills, Annandale, and Huntington. If you’re just outside those lines, call and we’ll confirm coverage. We also handle garage door installation in Seven Corners and garage door installation in Bailey’s Crossroads. Estimates are free, and the measure is scheduled around your availability.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Arlington
Garage door installation means replacing the door and its hardware as a matched system: panels, tracks, springs, rollers, hinges, and the connection to the opener. It’s different from a repair, which fixes one failing part on an existing door. We handle both, and we’ll tell you when a repair is the better value and when a new door is the honest answer.
A standard single or double door installation usually takes a few hours once the door is on site. The timeline that matters more is the ordering window, since the door is made or pulled to your measurements. We give you a realistic schedule up front rather than promising a date we can’t hold.
Installation typically runs $700 – $2,200, depending on size, material, and insulation, with opener installation at $250 – $550 if you need one. The written estimate sets the final price, and it’s agreed before any work starts. Call (877) 745-1385 for an exact quote, since estimates are free.
Yes, we’re certified to service Clopay doors, along with LiftMaster, Chamberlain, Genie, Amarr, Wayne Dalton, Craftsman, and Raynor. That covers the doors and openers most Arlington homes already have. If your door is a brand not on that list, call and we’ll tell you whether we can help.
Yes, we offer emergency garage door service for situations that can’t wait, like a door stuck open or a spring that’s blocking your car in. Call us and we’ll book the earliest slot we have. A full new installation is scheduled work, so that part follows the measure and order steps rather than an emergency callout.
The warranty depends on the door and opener you choose, and we go over it with you before you sign off on the estimate. You’ll know what’s covered on the door, the hardware, and the labor before the install is scheduled. Ask us about it at the measure and we’ll walk through the details.
Clear the garage floor and the driveway in front of the door, and move anything fragile away from the walls on either side. Take down any shelving or hooks mounted where the tracks and springs will go. And make sure someone’s home to walk through the finished door and the opener setup with us.
Written by the team at Gaines Garage Door Repair.
Schedule Your Garage Door Installation Service in Arlington Today
Whether you’re replacing a failing single door in Arlington or planning a custom double door with a new opener, the next step is a free measure and a written price. Call Gaines Garage Door Repair at (877) 745-1385 for a no-obligation estimate, and we’ll schedule the measure at a time that works for you.
Written by the team at Gaines Garage Door Repair.