Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Arlington?
Garage door work in Arlington typically runs $150 – $600 for repairs, with most single repairs landing in the $120 – $340 range. A new door installation is a bigger project, usually $700 – $2,200 depending on door style, size and whether the opener needs replacing too. Those are typical estimated ranges for the Arlington market, and the written estimate you get after a technician looks at your door sets the final price.
What you’ll actually pay hinges on what failed. A snapped spring is a different job from a bent track, and a door that won’t close because of a misaligned safety sensor is different again from one with a dead opener motor. We diagnose first, then quote. If you need us out today, call (877) 745-1385 and we’ll get someone to you as fast as we can.
Key Takeaways
- Most common garage door repairs in Arlington cost $120 – $340.
- Spring repair runs $180 – $340 for one spring; a matched pair is usually replaced together and costs about twice that.
- New door installation typically falls between $700 and $2,200.
- Opener repair ($120 – $320) is almost always cheaper than opener replacement ($250 – $550).
- Every estimate is free, and the written quote is the price.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs cost in Arlington this year. These are estimated ranges for typical residential work; your door’s size, brand and condition can move the number within that range or occasionally outside it, which is why we put it in writing after we’ve seen the door.
| Service | Typical Estimated Cost | Notes |
|---|---|---|
| Garage Door Repair (general) | $150 – $600 | Broad range covering most single-visit repairs |
| Spring Repair | $180 – $340 | Price is for one spring; a matched pair is about twice that |
| Cable Repair | $130 – $250 | Often done alongside spring work |
| Opener Repair | $120 – $320 | Motor, logic board, sensor or remote issues |
| Opener Installation | $250 – $550 | New unit, includes mounting and calibration |
| Panel Replacement | $250 – $500 | Dented or damaged section replaced individually |
| Track Realignment | $120 – $240 | Door knocked off track or binding |
| Roller Replacement | $110 – $220 | Noisy or worn rollers swapped out |
| New Door Installation | $700 – $2,200 | Depends on style, size and material |
Two things push the number up more than anything else: the brand and model of what you own, and how long the problem has been left alone. A worn roller that gets replaced early is a small job. The same worn roller grinding for a year can wear the track, stress the hinges and turn into a bigger repair. We work on the brands Arlington homeowners already have, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, so we’re not learning your door on your dime. Our technicians have up to 12 years of experience, and we’d rather tell you the honest scope than quote low and add charges later.
For a full look at what we handle, see garage door repair in Arlington.
What Affects Garage Door Pricing in Arlington
Arlington’s housing stock is part of why no two quotes here look alike. The county mixes older brick colonials, mid-century ramblers and a lot of newer townhomes, and the garage setups that come with them vary widely. A tight single-car bay in a 1950s build is a different job from a wide two-car opening on a newer townhouse, even when the same part failed.
- Door size and weight. A heavier insulated door needs stronger springs and more labor to lift and hold safely. Standard single doors sit at the low end; oversized or fully insulated double doors sit higher.
- Spring type. Torsion springs, mounted on a shaft above the door, cost more to replace than extension springs that run along the sides. Most newer Arlington homes use torsion; older ones sometimes don’t.
- Brand and part availability. Common brands like Clopay and LiftMaster are straightforward. An older or less common model can mean tracking down the right panel or opener part, which adds time.
- Number of springs. A one-spring replacement is priced as one spring. If your door uses a matched pair, they’re nearly always replaced together, and that costs about twice the single-spring range.
- Whether the opener is involved. Sometimes the door is fine and the opener is the problem. Sometimes both. We test the whole system so the quote covers what actually needs fixing.
- Weather and seasonal timing. Northern Virginia’s freeze-and-thaw cycles are hard on springs, cables and the metal itself. A cold snap that cracks a spring usually means a lot of Arlington homeowners calling the same week, so scheduling fills up fast.
If you’re weighing a repair against a full replacement, it helps to know what installation involves. Our page on garage door installation in Arlington walks through door styles, insulation and what the job actually looks like from start to finish.
How to Save on Garage Door Repair and Installation
You don’t need to spend the maximum to get a door that works. A few practical moves keep the number down without cutting corners on safety.
- Fix small problems before they grow. A noisy roller or a slightly misaligned track is a $110 – $240 job. Left alone, either one can damage panels or the opener and push the total toward the top of the $150 – $600 repair range.
- Repair the opener before replacing it. Opener repair at $120 – $320 beats installation at $250 – $550 most of the time. If the motor and logic board are sound, repair is the right call. We’ll tell you honestly when a unit is past saving.
- Replace panels instead of the whole door. A single dented section can usually be swapped for $250 – $500, well under a full installation.
- Replace springs as a pair. If one spring breaks, the other has taken the same wear. Replacing both at once costs about twice the single-spring range but saves you a second service call later.
- Get the estimate in writing before work starts. Free estimates mean you can compare without spending anything, and the written quote is what you pay.
Estimates are free, and we don’t charge to tell you the door doesn’t need the repair you thought it did. Call (877) 745-1385 to book one.
When a Repair Makes More Sense Than a New Door
If the door structure is sound, the panels are straight and the opener works, repair is almost always the better value. A $180 – $340 spring replacement on a door with years of life left is money well spent. Replacement starts making sense when panels are rusted through, the door is consistently out of balance, or repeated repairs are adding up to more than a new door would cost.
When Replacement Is the Smarter Spend
A new door at $700 – $2,200 is a real outlay, but it resets the clock on every wear part at once. If you’re already facing a spring replacement, a cable repair and a failing opener in the same year, pricing a new installation alongside the repair quote is worth doing. We’ll give you both numbers so you can decide.
Emergency Garage Door Service in Arlington
A door stuck open overnight or a broken spring that has your car trapped inside is not a wait-until-next-week problem. We treat those calls as genuine urgencies, not routine appointments, and we’ll tell you honestly how soon we can get to you when you call.
A failed spring or a door hanging off its track is also a safety issue. Don’t try to force a door that’s off balance or lift it by hand with a broken spring; the tension stored in those parts can cause serious injury. Call us and let a trained technician handle it.
If you’re in a nearby community, we handle the same work across the area. Homeowners in Alexandria and Fairfax reach us with the same kind of calls, and we respond the same way.
Why Brand Familiarity Keeps Arlington Costs Down
Knowing the door and opener you already own cuts diagnostic time and reduces the chance of a wrong part. We’re certified to service eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That means when you call about a Chamberlain opener that won’t respond or a Wayne Dalton panel that’s dented, we’re not guessing.
It also means we’re not pushing a replacement you don’t need. Our approach is the right fix, not the easiest upsell. Springs are our specialty, not a side job, and we handle opener repairs, panel swaps and new installations with the same process. One company, start to finish, no coordinating between contractors.
Homeowners in Falls Church and McLean get the same multi-brand service, and so do neighbors in Bethesda and Rockville just across the line.
What a Typical Arlington Garage Door Visit Looks Like
Most calls start with a symptom: the door won’t open, it opens partway and stops, it’s noisy, or the opener light flashes and nothing happens. A technician arrives, tests the door by hand to check balance, inspects the springs, cables, rollers and tracks, and checks the opener and safety sensors. Then you get a written estimate before any work begins.
Straightforward repairs like a spring swap or an opener fix are often finished in the same visit. Panel replacements and installations may need a return trip once the part arrives. Either way, you’ll know the price and the plan before we start.
Related Guides Worth Reading
- Garage door spring repair – why springs fail and what the repair involves
- Garage door opener repair – diagnosing motor, sensor and remote problems
- Garage door cable repair – what a frayed or snapped cable means
- Garage door panel replacement – when a single panel can be swapped
- Garage door track repair – doors off track and what causes it
- Garage door roller replacement – quieting a noisy door
- Emergency garage door service – when the door can’t wait
- Garage door repair cost guide – the full pricing picture
FAQs – Garage Door Cost in Arlington
How much does garage door repair cost in Arlington?
Most garage door repairs in Arlington cost between $150 and $600, with common fixes like roller replacement or track realignment landing at the lower end, around $110 – $240. The written estimate after diagnosis sets the final price. Call (877) 745-1385 for a free quote.
How much does spring replacement cost in Arlington?
Spring repair in Arlington runs $180 – $340 for one spring. If your door uses a matched pair, both are usually replaced together because they wear at the same rate, so a pair costs about twice that range. Call (877) 745-1385 and we’ll confirm which setup your door has.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door structure is sound, since most repairs fall between $150 and $600 while a new installation runs $700 – $2,200. Replacement makes more sense when panels are badly damaged or repairs keep adding up. Call (877) 745-1385 for both numbers side by side.
How much does a new garage door cost in Arlington?
A new garage door installed in Arlington typically costs $700 – $2,200, depending on size, material and insulation. Opener installation, if needed, adds $250 – $550. Call (877) 745-1385 for a free on-site estimate.
Can you come today if my door is stuck?
Yes, emergency service is available for doors that are stuck open, stuck shut or off their tracks. A broken spring blocking your car in gets treated as a real urgency. Call (877) 745-1385 and we’ll tell you how soon we can get to you; the estimate is free.
Pricing reflects the Arlington market as of 2026. Gaines Garage Door Repair offers free estimates – call (877) 745-1385.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Nicole Hayes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Simone Robinson"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Brandon Yang